Table of Contents
- 1 Can you change ball joints yourself?
- 2 How long does it take to replace both lower ball joints?
- 3 Do you need an alignment after replacing ball joints?
- 4 How long can you drive on a bad ball joint?
- 5 Can you hammer in a ball joint?
- 6 Should I replace upper and lower ball joints at the same time?
- 7 Should you replace upper and lower ball joints at the same time?
- 8 How long can you drive on bad lower ball joints?
Can you change ball joints yourself?
Recognizable for a knocking sound in the wheel well as you execute a turn, fixing old ball joints is an important part of keeping your vehicle road-safe. You can do it yourself for the price of the parts and the right approach.
How long does it take to replace both lower ball joints?
The ball joint is a small part of your car, and the part itself is only going to cost between $20-$150 or more, depending on where you get it from and what kind of vehicle you own. It can take a little over an hour to get it replaced, so the full ball joint replacement cost will be between $100 and $400.
Do you need an alignment after replacing ball joints?
alignment after ball joint is not necessary unless your previous alignment was done when ball joints were bad and loose. If your car is driving sloppy after ball joints replacement, check other suspension…
How long can you drive on a bad ball joint?
short answer is… it depends on how bad they are. the lower ball joint typically gets more wear than the upper. i’d say, if there’s just a little wiggle in either joint, you should have no problem driving 500 miles.
Can you hammer in a ball joint?
Ball joints, steering knuckles and control arms get extremely dirty on the undercarriage of any vehicle. If you use a hammer on the bottom of the ball joint to knock it into place it can cause a ripple effect of damage. The lamination on the ball joint can deform or mushroom into the knuckle.
Should I replace upper and lower ball joints at the same time?
Q: Should I Replace All Ball Joints at the Same Time? A: Plenty of mechanics will recommend that you replace both the upper and lower ball joints at the same time. They may also recommend checking related components at the same time, such as the stud hole in the steering knuckle.